The I Series

Comprehensive Bale Handling Equipment

We now offer a comprehensive range of round and square bale handlers to suit the demanding needs of the farmer and contractor

I75

The I75 Multi Shear is our latest innovation in agricultural implements. It is a universal tool for handling pit and baled silage. This works as a shear grab/block cutter and a bale shear. Powered by two high capacity hydraulic rams, the front and side blades cut the silage block leaving a clean, sealed face to prevent secondary fermentation. Bales can also be easily split while plastic and netting are retained.

I75 at a Glance

  • Splits round bales from 1.2m to 1.5m while retaining plastic and net
  • Feed directly on feed passage, feed trailers, ring feeders & diet feeders
  • For pit silage and bales of silage, hay & straw
  • One standard hydraulic coupling
  • Brackets available for all modern tractors & loaders

I73

When used with a diet feeder – farmers are now experiencing massive reductions in mixing time of up to 60%!
The result – massive savings in labour, fuel and diet feeders maintenance with greatly reduced wear and tear on the mixer drive system.

I73 at a Glance

  • Splits round bales up to 1.5m while retaining plastic and net
  • Feed directly on feed passage or feeders
  • Directly split and feeds bale into diet feeder
  • Cuts silage, hay & straw bales with ease
  • Ideal for handling bales directly into mixer wagons or feed passageways and feeding rings
  • One standard hydraulic coupling
  • Brackets available for all modern tractors & loaders
Request Information
Information on Financing & Trade In

I73

I75

Specs

I73

Height (Closed)  0.85m
Height (Open) 1.75m
Width 1.82m
Length 1.10m
Weight 450kgs
Maximum Bale Length 1.3m
Maximum Bale Diameter 1.55m
Maximum Bale Weight 1400kgs
Hydraulic Connection Double acting service
Oil Pressure (Max / Min.) 210 bar / 150 bar
Oil Amount (Max / Min.) 70 lts / 20 lts
Maximum Counter Pressure 15 bar

I75

Height (Closed)  0.9 m
Height (Open) 1.75 m
Width 2m
Length 1.3 m
Weight 630 kgs
Maximum Bale Length  1.4 m
Maximum Bale Diameter 1.55 m
Maximum Bale Weight 1400 kgs
Hydraulic Connection Double acting service
Oil Pressure (Max / Min.) 210 bar / 150 bar
Oil Amount (Max / Min.) 70 lts / 20 lts
Maximum Counter Pressure 15 bar

I73

I73

I75

I75

“I feed 1200 tonnes of pit silage, 750 bales of silage and 250 bales of straw every winter. I wanted a machine that handled pit silage, baled silage and bales of hay and straw. This universal machine completes all my feeding and reduces my daily workload by one and a half hours. Now I can conserve as much pit or baled silage and I can integrate feeding out both at the same time with ease. I do not leave the cab and all feeding and handling is carried out from the tractor seat. Last years winter feeding was so much easier with the Multi Shear.”

PJ MurphyDairy and Beef Farmer, North Kilkenny. Multi shear

“The Cleanfeed feeds beet to my dairy herd. This is a front loader mounted on a 95HP. Tractor. Its versatility allows me to mount it on three-point linkage at any time. I feed into feed troughs and along silage in feed passages. This machine really suits my spring grazing system as any time I am tight for grass, I buffer feed beet along under the strip grazing fence. The simplicity of how the machine cleans and washes is excellent. Beet is an expensive source of energy. I plan to fit a Meal Attachment Plate this summer to also feed beet.”

Courtenay SweetnamDairy Farmer, Douglas, Co.Cork. Cleanafeed
ABOUT
Tanco Autowrap Limited
Bagenalstown
Co. Carlow
Ireland. R21 E278
T:+353 (0)59 972 1336
E: info@itanco.com